Cobra fi2000 installation instructions

[Kaari]

Cobra fi2000 installation instructions
.
.
Download / Read Online Cobra fi2000 installation instructions
.
.
.

.
Read all instructions carefully and completely before installing your new Fi2000 module. It is recommended however, that a qualified mechanic or technician install this product. 1. Remove the seat by unbolting the two hex bolts attaching the seat. 2. Remove the battery cross brace by unscrewing the phillips head screw and unattach the fuse
filexlib. Product Description. • The proven Fi2000 now comes with leads that snap directly into your bike’s injector bodies• You can get a full range of fuel adjustments across all rpm ranges, improving ridability by smoothing out the powerband and giving the bike more throttle response• The Fi2000R corrects lean air/fuel mixture problems and
Fi2000 PowrPro Digital Fuel Processor by Cobra USA®. The Fi2000R digital fuel processor is designed to work with all H-D™ exhaust systems (stock or aftermarket) equipped with oxygen sensors in place (closed-loop design). Works much like a carburetor jet kit with adjustments similar to the air-mixture screw, the needle and clip positions and
Read all instructions carefully and completely before installing your new Fi2000R module. It is recommended that a qualified mechanic or technician install this product. Before installing the Fi2000 it is recommended that the gas tank be low on fuel. 1. Remove the seat, and the chrome right hand cover from the engine. Remove the two dome head
9 Posts. #9 · Feb 26, 2011. Gilly said: I installed a new Jug Hugger exhaust and then installed the Cobra Fi2000R fuel mgmt tuner. I know that all the wires are installed correctly and the ground is also installed correctly. I turn the ignition to the on position and LED lights on the Fi2000R are suppose to light butthey don’t.
create fuel setting problems and detonation. Cobra recommends the installation of any of its complete exhaust systems. These settings have been tested for stock motorcycles that have popular aftermarket slip-on exhaust systems installed. This Fi2000 will also work in combination with a Cobra® PowrFlo™ Air Intake System and various
The fi-2000 can ONLY richen your mixture not lean it out so you’ll have to run it a while and see what it’s doing. If you have a lot of decel popping then turn the pot next to the green led up (clockwise). If you don’t have popping but your gas mileage mileage is crap turn the same pot down (counter clockwise).
601 Posts. Discussion Starter · #1 · Apr 14, 2011. Bought this 06 MS and it has the FI2000 on it, not the plug and play R model. Was going to adjust the settings and noticed the red light doesn’t come on when I turn on the ignition. Searched the net and all is for the R model, even Cobras site. All lights are to come on when I turn swtich, right?
Buy Cobra Fi2000 PowrPro Black Fuel Controller starting at $445.71 plus free shipping at Parts Giant. Motorcycle Dirt Bike ATV Brands. My Account Support. Free Shipping. Expert Service. Call 888-575-6570. Motorcycle Menu. Installation was quick with easy to install instructions. I ran the tuner for a couple of days before I had to use the Cobra delivers the Fi2000 set up for its own pipes, but the box has sufficient range to work on a variety of pipes, or even on a stock bike. Our setup recommendations follow Cobra’s lead by referencing points on a clock. Straight up is 12:00, pointing right is 3:00 and so on. There are no markings on the dials themselves. ADVERTISEMENT
Understanding / How to use the Cobra FI2000 PowerPro Black App – YouTube The Cobra FI2000 PowerPro Black tuner is a cool device, I have one connected to my Honda Stateline 1300. Although it
For anyone that has installed an Fi2000 on a Vulcan 900, this question is for you. The instructions identify two wires connected to the ECU for tapping. One is identified as blue with a red stripe. Found that one easy. The second one is identified as blue with a green stripe. I do not find this wire (among the dozens of wires attached to the ECU).
For anyone that has installed an Fi2000 on a Vulcan 900, this question is for you. The instructions identify two wires connected to the ECU for tapping. One is identified as blue with a red stripe. Found that one easy. The second one is identified as blue with a green stripe. I do not find this wire (among the dozens of wires attached to the ECU).

.
Cobra fi2000 installation podrecznik
Cobra fi2000 installation met de hand
Cobra fi2000 installation pdf
Cobra fi2000 installation manual lawn
Cobra fi2000 installation handboek

[投稿者]

投稿